|
|
|
Samson PA Speakers and Studio
Monitors |
| |
LoudSpeakers
List Price: $774.99 Our Price: $569.00
Back to Top
|
C-com16 - Compressor
C-control - Control Room Matrix
C-que8 - Headphone Amp
C-valve - Tube Mic Preamp
Airline 77
Instrument Wireless
SW7ASGF/SW7ASGG
Handheld Mic system
SW7ASHX
Presentation System
SW7ASLQL5
Aerobics Headset System
SW7ASCE
Vocal Headset System
SW7ASCV
Wind Instrument Systems
SW7ASW4
SW7ASWA
Airline Systems
AirLine Bass
AirLine Guitar
UHF Wireless Systems
Concert 77
Guitar System
SW77SGT
Handheld Mic System
SW77SHQ7
SW77SH05
Lavalier System
SW77SLM5
SW77SL3
SW77SL1
Headset System
SW77SCH5
SW77SCE
SW77SCV
Wind Instrument System
SW77SW4
VHF Wireless Systems
Stage 5
Instrument System
SW05SGT
Handheld Mic System
SW05SHQ7
SW05SH05
Lavalier System
SW05SLM5
Headset System
SW05SCH5
Stage 55
Instrument System
SW55SGT
Handheld Mic System
SW55SHQ7
SW55SH05
Lavalier System
SW55SLM5
Headset System
SW55SCH5
|
|
|
|
List Price: $884.99 Our Price: 649.00
Back to Top |
|
|
|
dB500 - Passive Loudspeaker |
The passive dB500 has many of the
same features as the dB500a, including the same
rugged enclosure, and advanced drivers. A
natural sounding fixed crossover is built-in,
and the back panel features 1/4" and XLR
connectors.The dB500 speaker cabinet features
an array of mounting options. Designed with
floor monitoring in mind, they are also easily
stacked or permanently installed. A 1 3/8" pole
receptacle is built in, and 10 reinforced fly
points are available.
|
|
List Price: $499.99 Our Price: $369.00
Back to Top |
|
|
|
dB500a -
Active Loudspeaker |
Inside our rigid
custom designed cabinet is a 15"
driver designed exclusively for
this project. It's matched with
a new 1.75" Neodymium high
frequency driver, aimed through
a 1" diameter horn. The dB500a
features 500 watts of Class H
power (400 watts low
frequency/100 watts high
frequency) and has a crossover
designed for high SPL. Our
exclusive Optimax(TM) signal
processing circuitry provides
total speaker protection but
won't cut the low end at high
volumes, as similar speakers
with sliding filters do.
The back panel has a built-in
mixer-like preamp section with
mic and line inputs, XLR
connectors and level controls.
Controls for the selectable low
pass filter and Optimax
processing are also included.
The dB500a speaker cabinet
features an array of mounting
options. Designed with floor
monitoring in mind, they are
also easily stacked or
permanently installed. A 1 3/8"
pole receptacle is built in, and
10 reinforced fly points are
available.
|
| |
|
|
|
List Price: $819.99 Our Price: $599.00
Back to Top
|
|
|
| |
Everything You Need, Even Good
Sound.
Expedition Express is the total solution to
professional sound, made portable. It gives you
everything you need to make a professional
presentation anywhere you can roll it.
Expedition Express is a great solution for
performers on the move. Bands, mobile DJ's,
schools, houses of worship, corporate A/V and
institutional applications-anywhere portable,
high quality sound is required.
Unlike most portable PA systems, the Expedition
Express is designed to sound great. Not just for
public speaking either-but for live and recorded
music, too.
The system is comprised of a pair of rugged,
acoustically balanced two-way loudspeakers, a
4-channel mixer with DSP, a powerful 250 Watt
amplifier and all the accessories you need.
What's more, the system interlocks, and packs up
into a single rolling unit so it's easy to
transport.
We've thought of everything: Expedition Express
includes a professional dynamic microphone, mic
clip, mic cable, extension speaker cable and
protective ballistic nylon cases.
Compact and Powerful
The Expedition Express combines a powered
speaker with built-in amplification and
controls, and a light-weight second speaker or
"slave". When set up for performance, the two
cabinets are connected by a single cable. When
they are packed of for the road, the lightweight
passive speaker cabinet locks into the top of
the amplified speaker cabinet with a unique
auto-locate mechanism. Each loudspeaker is
housed in a lightweight, yet heavy-duty, molded
resin cabinet with extensive internal bracing to
give it rigidity, low resonance and the maximum
possible volume.
Pro Quality Electronics
The Expedition Express's integrated amplifier
is perfectly matched to the drivers for
surprisingly high efficiency. The sound is clear
and hard-hitting. Built-in digital signal
processing (DSP) adds dramatic pro-quality
effects like reverb and echo at the flip of a
switch. Selecting from six preset effects makes
getting great sound easy and fast.
Like Samson's Expedition Pro enclosures, the
Express features custom designed high and low
frequency drivers. The High Frequency section
employs an elliptical wave-guide horn that
offers extra wide dispersion for maximum
coverage.
Samson's engineering team set out to design the
ultimate in portability, with professionally
superior sound for all kinds of applications.
With molded-in handle and wheels, you can roll
the cabinet anywhere you want. This makes
Expedition Express ideal for boardrooms,
classrooms and fitness studios, either as a
portable speaker or mobile all-in-one sound
system.
The Complete System Approach
The Expedition Express takes the guesswork
out of public presentations. Everything you need
is in one package: Speakers, built-in mixer with
DSP, Samson microphone and all the cables. Best
of all, you don't have to be an engineer to hook
it all up. Sets up (and packs up) in less than 5
minutes.
Not only is it easy to use, it has 250 Watts of
power and professional grade electronics so it
sounds great-good enough even for professional
musicians. So if you are looking for an
easy-to-use portable PA, look no further than
the Expedition Express by Samson. It's your
ticket to great live sound.
|
| |
|
List Price: $839.99 Our Price: $599.00
Back to Top
|
|
|
|
XP100
|
The passive XP100
enclosure is housed in a sleek
molded cabinet with substantial
internal bracing to support its
thick side wall construction.
Designed to be lightweight and
compact, the XP100 is still
rigid enough to allow maximum
energy to be transferred from
the cabinet into the room.
Neutrik(R) Speakon connectors,
convenient fly-points, a steel
grill and scuff-resistant
textured finish ensure
exceptional versatility and long
life.
Like all Expedition enclosures,
the XP100 features a custom
designed 12" Low Frequency
driver. It combines a 2.5" voice
coil Kapton former and 50 oz
barium ferrite magnet to produce
an accurate, super-tight bass
response. The XP100's High
Frequency section employs a 1"
compression driver along with an
elliptical wave guide horn that
controls dispersion. This in
combination with a phasing plug
produces a linear overall
response with a clear, musical
top end.
Power handling: 250W Program,
400W Peak Max.
Improved 12" Heavy-duty
Celestioin LF Driver, 1"
Titanium compression Driver, and
Exclusive Celestion/Samson
designed crossover.
|
| |
|
|
|
List Price: $269.99 Our Price: $199.00
Back to Top
|
|
|
|
XP200
|
When tilted back, the XP200
functions nicely as an onstage monitor.
Using the same cabinet and speaker design as the
EX10, the XP200 powered enclosure has a bi-amped
power cell capable of producing up to 200 Watts
RMS (160 Watts Low/40 Wattts Hi). It also
includes an active crossover and built-in
limiting.
The XP200's power module gives you three stages
of speaker protection, including relay switching
for power up and power down. The onboard limiter
circuit ensures a clean output even when you
push it to maximum sound pressure levels.
Because of its perfectly matched amplifier and
speakers, the XP200 is particularly effective as
a powered monitor.
Improved 12" Heavy-duty Celestioin LF Driver, 1"
Titanium compression Driver, and Exclusive
Celestion/Samson designed crossover.
|
| |
|
List Price: $419.99 Our Price: $299.00
Back to Top |
|
|
|
XP300
|
The most comprehensive version of
Expedition, the XP300 is a powered loudspeaker
with a built-in 4-channel stereo mixer and
digital effects processing.
Designed as a completely portable, all-in-one PA
system, the XP300 ideal for people who want
superior audio anywhere they go. Whether you
just want rugged and versatile loudspeaker
enclosure that consistently deliver big sound,
or a complete professional audio system in a
highly mobile design perfect for today's
fast-paced world, Expedition is the answer.
The XP300's mixer features two bands of
equalization, two Mic/Line channels and a Stereo
Channel with a mic pre. RCA inputs allow you to
easily interface a CD, Mini Disk or Tape player.
The digital processing section consists of six
high-quality presets that range from a touch of
room ambience to lush, reverberant halls.
Versatile and easy to use, the mixer also lets
you daisy-chain additional enclosures in stereo.
The XP300 has a bi-amped power cell capable of
producing up to 200 Watts RMS (160 Watts Low/40
Wattts Hi).
Improved 12" Heavy-duty Celestioin LF Driver, 1"
Titanium compression Driver, and Exclusive
Celestion/Samson designed crossover.
|
|
List Price: $659.99 Our Price: $499.00
Back to Top
|
|
Playback Monitors
List Price: $99.99 Our Price: $69.00
Back to Top
|
|
List Price: $149.99 Our Price: $99.00
Back to Top |
|
List Price: $199.99 Our Price: $129.00
Back to Top |
|
List Price: $324.99 Our Price: $219.00
Back to Top |
|
List Price: $239.99 Our Price: $149.00
Back to Top |
|
List Price: $239.99 Our Price: $149.00
Back to Top |
|
List Price: $274.99 Our Price: $169.00
Back to Top
|
|
List Price: $274.99 Our Price: $169.00
Back to Top
List Price: $344.99 Our Price: $219.00
Back to Top
List Price: $344.99 Our Price: $219.00
Back to Top
|
|
List Price: $519.99 Our Price: $329.00
Back to Top
List Price: $589.99 Our Price: $369.00
Back To Top |
|
List Price: $569.99 Our Price: $349.00
Back To Top
|
|
Studio Monitors
List Price: $279.99 Our Price: $199.00
Back to Top
|
|
List Price: $549.99 Our Price: $399.00
Back to Top
|
|
List Price: $199.99 Our Price: $149.00
Back to Top |
|
List Price: $329.99 Our Price: $239.00
Back to Top
|
|
List Price: $279.99 Our Price: $199.00
Back to Top
|
|
|
| |
The Resolv 65a active monitors
sound full and balanced with an uncompromised
transparent midrange, leaving room to accurately
mix vocals, snare hits and reverb trails. The
Resolv 65a features 6.5" copolymer butyl
surround Woofer, a 1" titanium diaphragm,
neodymium magnet with ferro-fluid cooled tweeter
and gold plated connectors all mounted in a
ported tuned cabinet. In addition, the Resolv
65a utilizes a midrange contour control. In the
nominal position, the Resolv monitors are
clinically accurate, but by dialing in the
control, you can tailor the frequency response
from hi-fi to an aggressive midrange, emulating
some of the classic near field monitors.
Each unit is powered by a dual
power amp, (75 watts low and 25 watts high)
perfectly matched to the drivers. The active
crossover allows precise control of the
crossover frequency.
|
| |
midrange
contour control
6.5"
copolymer butyl surround woofer
1"
titanium diaphragm, neodimium magnet with ferro-fluid
cooled tweeter
active
crossover
dual
power amp (75 watts low and 25 watts high)
perfectly matched to the drivers
ported
tuned cabinet
|
|
List Price: $399.99 Our Price: $299.00
Back to Top
|
|
List Price: $539.99 Our Price: $399.00
Back to Top
|
|
List Price: $249.99 Our Price: $179.00
Back to Top
|
|
|
| |
Taking care of the low end in any
near-field monitor or multi-media system, the
Rubicon R10s is a powerful 150 watt active
subwoofer featuring a 10" low frequency driver
with a Butyl surround, providing extended range
and tight low frequency response.
In order to maximize the sound of your monitor
system, the R10s has a built-in active
crossover, with variable crossover frequency,
for connecting to your satellite speakers. The
R10s provides intelligent sub-satellite control
thanks to the clever switching that
automatically returns the satellites to
full-range operation whenever the subwoofer is
muted. The rear panel features a foot-switch
jack allowing you to easily switch on and off
the subwoofer on the fly, and a phase switch to
time align your monitors. Balanced inputs and
outputs on standard XLR and 1/4-inch connectors
make interfacing to other active monitors or
power amplifier simple.
The R10s comes with an infrared remote control,
allowing you to easily control your monitor
system from anywhere in the control room. The
remote control instantly gives you additional
control room monitoring features by providing
Sub Level, System Level, Dim, Sub Mute and
System Mute.
R10s is also a perfect add-on for any near field
monitor system where ex-tended low end is
desired.
|
| |
150
watt powered subwoofer
Heavy-duty
10-inch woofer with butyl surround
Variable
frequency three pole active crossover and volume
control
Balanced
XLR and gold-plated RCA line inputs
Balanced
XLR outputs
Wireless
IR remote controls System Level, Sub Level, Dim,
Mute and Subwoofer Mute
Eight
segment LED input VU meter
|
|
List Price: $389.99 Our Price: $299.00
Back to Top
|
|
List Price: $469.99 Our Price: $349.00
Back to Top
|
|
List Price: $579.99 Our Price: $449.00
Back to Top
|
|
List Price: $679.99 Our Price: $529.00
Back to Top
|
|
Terms and Conditions
Items ship within 2-3
business days directly from manufacturer |
 |